Change Currency: USD

Change Language: Deutsch Dansk English (UK) English (US) Español Française עברית (ישראל) Dutch Türkçe

Dirt Tricks Timing Chain Tensioner for KTM 250, 400, 450, 505, 530)

$109.95 $89.95

Product Information

Dirt Tricks KTM Timing Chain Tensioner

 For the RC4, XC4, RF4 2008, 2011 motors. (250, 400, 450, 505, 530, all models)

  • If you have a "ticking" noise at idle, on your newer four-stroke, you need this part.

  • Resolves issues with a slack timing chain on the new 4-stroke motors.

  • Uses oil pressure combined with a mechanical ratchet system to prevent collapse.

  • Used by Blais Racing Services in all of our Team Race Bikes and recommended for everyone.  Don't ruin your engine by a failing KTM Tensioner.

 

The 2008 and newer four-stroke KTMs (and some earlier SX models) use a timing chain tensioning device intended to develop its force using the engine oil pressure hydraulically. The OEM components have serious flaws (reviewed below), which can leave the timing chain in a slack condition. This can have disastrous consequences.  Dirt Tricks has developed a simple, effective and failsafe replacement. The new tensioner correctly captures the oil pressure. Additionally, it uses a positive mechanical ratcheting system which prevents it from collapsing. The replacement unit will work on all newer four-strokes in 250, 400, 450, 505, 530 models using the RC4, XC4, or RF4 motor (not for the RFS motors). This means the following bikes:

  • 2005-2011  all 250 four-stroke models.

  • 2007-2011  450 SX-F and 450 SXS-F models.

  • 2008-2011  all 400, 450, 505, 530 four-stroke models.

With very satisfying test results from our race bikes, we have completed CNC production of the new tensioner. They can be installed in less than five minutes.

 

Timing chain tensioner Video

Don't forget to check out our Emissions Block Off Kit and Thermostat Eliminator Washer.

 

 

 

 

As the spring is inserted and you compress it, you can feel and hear the clicks as the piston ratchets into position. There are a total of 11 ratchet positions at 1mm spacing. If you extend to more than 9 clicks, you probably need to replace your timing chain.

 

Installation Instructions - http://www.dirttricks.com/Tensioner%20Instructions%20Nates%20revise.pdf

Below is an overview of the OEM design verses the Dirt Tricks design.

 

Product Code: DIRG90

Customer Reviews

This product hasn't been reviewed yet. Write a review

 

Copyright© 1999 - 2017. All rights reserved to Blais Racing Services

Mobile Site